RTV Server Settings

In order to use CT RTV, you need to add a RTV server with CT RTV server installed.
The RTV server can be added in [Window] -> [Preferences] -> [RTV Server].

Add a RTV server

1. Click [Add] in [Window] -> [Preferences] -> [RTV Server].
   

2. In the [Add RTV Server] window, enter the RTV server information.
   

!The server name only accepts characters that can be used as Windows file names and can not be modified after adding the RTV server.

3. Click the [Connection Test] button to check the connection status with the RTV server you entered.
   

4. If the connection test with the RTV server is successful, click the [OK] button to add the RTV server.
   

5. You can see that the RTV server has been added.
   

Edit a RTV server

1. Double-click the server in the RTV server list, or select the server and click the [Edit] button.
   

2. On the [Edit RTV server] window, edit the server information and then click [OK].
   

3. You can see that the RTV server information has been edited.
   

Remove a RTV server

If you no longer use the RTV server, you can remove it.
When you remove a RTV server, the toolchain or project resources associated with the RTV server are deleted from the client environment(Can not be deleted if a RTV Toolchain added from that RTV server exists).

1. Select a server from the list of RTV servers and click the [Remove] button.
   

2. Click the [OK] button in the [Remove RTV Server] window(Depending on the size of the RTV server resource, it may take a minute or two).
   

3. You can see that the RTV server has been removed.