Pulseroller Products / Pulse Gear Drive (PGD) 24V/48V / General Specifications /
General Specifications
Washdown PGD-Ai | |
{}>. Shaft Diameter | {}=. 16 mm |
{}>. Keyway | {}=. 5 × 5 × 25 mm |
{}>. Motor Cable Length | {}=. 1000 mm |
{}>. Motor Controller Connection | {}=. 4 Pin M8 |
{}>. Housing Material | {}=. Stainless Steel – SUS304 |
{}>. Bearings & Shaft Materials | {}=. Stainless Steel – SUS303 |
{}>. Ingress Protection | {}=. IP66 |
{}>. O-Rings & Seals Material | {}=. Nitrile |
{}>. Mechanical Brake Option | {}=. No |
{}>. Ambient Temperature | {}=. -10 ~ 40º C (14 ~ 104º F) |
{}>. Ambient Humidity | {}=. 10 ~ 90 RH (No Condensation) |
{}>. Certifications | {}=. CE, UKCA, RoHS, IP54 UL Recognized to UL 1004-1 ETL Listed to UL 1004-1 & UL 1004-6 |
{}>. Input Voltage | {}=. 24 VDC |
{}>. Nominal Power Output | {}=. 40W (50W in BOOST Mode) |
{}>. Rated Current | {}=. 2.5A (3.5A in BOOST Mode) |
{}>. Starting Current | {}=. 5A BOOST Mode / 8A BOOST-8 Mode |
{}>. Maximum Motor RPM | {}=. 5800 ECO / 4200 BOOST & BOOST-8 |
{}>. Minimum Motor RPM | {}=. 580 |
{}>. Minimum Duty Cycle | {}=. 0.5 sec ON / 0.5 sec OFF (1.5 sec OFF when in BOOST-8 Mode) |
{}>. Continuous Operation | {}=. At rated load/current in ECO Mode |
{}>. Compatible Controls | {}=. ConveyLinx-Ai2 ConveyLinx-Ai3-24-FC ConveyLinx-Ai3-24-RC MotionLinx-Ai E-QUBE-Ai EZ-QUBE-W-Ai |