Pulseroller Products / Pulse Gear Drive (PGD) 24V/48V /
| PGD | PGD-Ai | PGD-Ai-48 | PGD-IDC | |
| {}>. Shaft Diameter | \4={}. 16 mm | |||
| {}>. Keyway | \4={}. 5 × 5 × 25 | |||
| {}>. Motor Cable Length | {}=. 600 mm (24”) | \2={}. 1000 mm (39”) | {}=. 500 mm (20”) | |
| {}>. Motor Controller Connection | {}=. 9 Pin JST | \2={}. 4 Pin M8 | {}=. 5 Pin M8 | |
| {}>. Washdown Model Available | {}=. No | \2={}. Yes | {}=. No | |
| {}>. Freezer Rated Model Available | \4={}. No | |||
| {}>. Mechanical Brake Option | {}=. Yes | \3={}. No | ||
| {}>. Ambient Temperature | \4={}=. -10 ~ 40º C (14 ~ 104º F) | |||
| {}>. Ambient Humidity | \4={}. 10 ~ 90 RH (No Condensation) | |||
| /3{}>. Certifications | \4={}. CE, UKCA, RoHS, IP54 | |||
| \3={}. UL Recognized to UL 1004-1 | {}=. | |||
| \3={}. ETL Listed to UL 1004-1 & UL 1004-6 | {}=. | |||
| {}>. Input Voltage | \2={}. 24 VDC | {}=. 48 VDC | {}=. 24 VDC | |
| {}>. Nominal Power Output | \2={}. 40W (50W in BOOST Mode) | {}=. 50W | {}=. 38W | |
| {}>. Rated Current | \2={}. 2.5A (3.5A in BOOST Mode) | {}=. 1.6A | {}=. 2.4A | |
| {}>. Starting Current | \2={}. 5A BOOST Mode / 8A BOOST-8 Mode | {}=. 4.0A | {}=. 3.0A | |
| {}>. Maximum Motor RPM | \2={}. 5800 ECO / 4200 BOOST & BOOST-8 | {}=. 7000 | {}=. 5800 | |
| {}>. Minimum Motor RPM | \4={}. 580 | |||
| {}>. Minimum Duty Cycle | \2={}. 0.5 sec ON / 0.5 sec OFF (1.5 sec OFF when in BOOST-8 Mode) |
\2={}. 0.5 sec ON / 0.5 sec OFF | ||
| {}>. Continuous Operation | \2={}. At rated load/current in ECO Mode | \2={}. No overheat at rated load/current | ||
| {}>. Compatible Controls | \2={}. ConveyLinx ConveyLinx-HTF ConveyLinxE ConveyLinxE-HTF E-QUBE EZ-QUBE EZ-QUBE-W EZ-QUBE-HTBF |
{}=. ConveyLinx-Ai2-48 ConveyLinx-Ai3-48-FC |
{}=. Any 3rd Part Control that provides: Pin 1: +24V Pin 2: Direction Pin 3: Gnd Pin 4: Error Pin 5: Analog Speed |