General Specifications

	PGD	PGD-Ai	PGD-Ai-48	PGD-IDC
Shaft Diameter	16 mm
Keyway	5 × 5 × 25
Motor Cable Length	600 mm (24”)	1000 mm (39”)		500 mm (20”)
Motor Controller Connection	9 Pin JST	4 Pin M8		5 Pin M8
Washdown Model Available	No	Yes		No
Freezer Rated Model Available	No
Mechanical Brake Option	Yes	No
Ambient Temperature	-10 ~ 40º C (14 ~ 104º F)
Ambient Humidity	10 ~ 90 RH (No Condensation)
Certifications	CE, UKCA, RoHS, IP54
	UL Recognized to UL 1004-1
	ETL Listed to UL 1004-1 & UL 1004-6
Input Voltage	24 VDC		48 VDC	24 VDC
Nominal Power Output	40W (50W in BOOST Mode)		50W	38W
Rated Current	2.5A (3.5A in BOOST Mode)		1.6A	2.4A
Starting Current	5A BOOST Mode / 8A BOOST-8 Mode		4.0A	3.0A
Maximum Motor RPM	5800 ECO / 4200 BOOST & BOOST-8		7000	5800
Minimum Motor RPM	580
Minimum Duty Cycle	0.5 sec ON / 0.5 sec OFF (1.5 sec OFF when in BOOST-8 Mode)		0.5 sec ON / 0.5 sec OFF
Continuous Operation	At rated load/current in ECO Mode		No overheat at rated load/current
Compatible Controls	ConveyLinx ConveyLinx-HTF ConveyLinxE ConveyLinxE-HTF E-QUBE EZ-QUBE EZ-QUBE-W EZ-QUBE-HTBF		ConveyLinx-Ai2-48 ConveyLinx-Ai3-48-FC	Any 3rd Part Control that provides: Pin 1: +24V Pin 2: Direction Pin 3: Gnd Pin 4: Error Pin 5: Analog Speed