Pulseroller Products / Pallet Handling 24V /

General Specifications



Senergy Pallet Handling Senergy-Ai Pallet Handling
Available Tube Diameters 60.5 mm (2.3/8”)
63.5 mm (2.5”)
Maximum Tube Length 1800 mm (70”)
Motor Cable Length 600 mm (24”) 1000 mm (39”)
Motor Controller Connection 9 Pin JST 4 Pin M8
Washdown Option Yes (60.5 mm only up to 600 mm length)
Mechanical Brake Option Yes No
Ambient Temperature -10 ~ 40º C (14 ~ 104º F)
Ambient Humidity 10 ~ 90 RH (No Condensation)
Certifications CE, UKCA, RoHS, IP54
UL Recognized to UL 1004-1
ETL Listed to UL 1004-1 & UL 1004-6
Input Voltage 24 VDC
Nominal Power Output 40W (50W in BOOST Mode)
Rated Current 2.5A (3.5A in BOOST Mode)
Starting Current 5A BOOST Mode / 8A BOOST-8 Mode
Maximum Motor RPM 5800 ECO / 4200 BOOST & BOOST-8
Minimum Motor RPM 580
Minimum Duty Cycle 0.5 sec ON / 0.5 sec OFF
(1.5 sec OFF when in BOOST-8 Mode)
Continuous Operation At rated load/current in ECO Mode
Compatible Controls ConveyLinx-HTF
ConveyLinxE-HTF
EZ-QUBE-W
EZ-QUBE-HTBF
ConveyLinx-Ai2
ConveyLinx-Ai3-24-FC
ConveyLinx-Ai3-24-RC
MotionLinx-Ai
EZ-QUBE-W-Ai