English
Deutsch
Senergy MDR & Gear Drive Technical Guide
2.0
2.0
1.2
Table of Contents
Senergy MDR & Gear Drive Technical Guide
2.0
Senergy MDR & Gear Drive Technical Guide — 2.0
Senergy MDR & Gear Drive Technical Guide — 1.2
Pulseroller Products
Motor Rollers
Available Models
General Specifications
Washdown Models
Mechanical Materials & Options
Minimum & Maximum Roller Length
Senergy
1 Stage Gearboxes
2 Stage Gearboxes
3 Stage Gearboxes
Senergy-Ai 24V & 48V
1 Stage Gearboxes
2 Stage Gearboxes
3 Stage Gearboxes
HBR – Holding Brake Roller
Senergy-IDC
Load Capacity
Approximate Weight
Available Materials & Interlocking & Lagging
Interlocking Options & Drawings
Tube Materials and Lagging Options
Performance Data
Senergy/Senergy-Ai 24V – 48.6 mm (1.9”) Diameter
Single Drive ECO Mode
Single Drive BOOST and BOOST-8 Modes
Built-In Brake Model
Dual Drive ECO Mode
Dual Drive BOOST and BOOST-8 Mode
Senergy-IDC – 48.6 mm (1.9”) Dia.
Senergy-Ai 48V – 48.6 mm (1.9”) Diameter
Speed Range, Torque, Tangential Force
Acceleration Torque
Acceleration Tangential Force
Selecting Motor Roller Speed Code
Motor Pulse to Distance Calculation
Ordering Information
Senergy/Senergy-Ai 24V/48V
Senergy-IDC
HBR – Holding Brake Roller
Mounting Options
Non Threaded Motor End Hex Shaft Fixing Brackets
Threaded Motor End Hex Shaft
Idler End Options
Proper Motor Grounding Practice
Installation Instructions
Pallet Handling 24V
General Specifications
Mechanical / Materials / Options
Load Capacity
Approximate Finished Weight
Minimum Roller Length
Available Materials / Interlocking / Lagging
Interlocking Options
Performance Data
60.5 mm (2-3/8”) Diameter
63.5 mm (2.5”) Diameter
Ordering Information
Installation Instructions
Pulse Gear Drive (PGD) 24V/48V
General Specifications
Washdown
Micro-V Pulley Kit Accessory
Mechanical Data & Drawings
Senergy-PGD / Senergy-PGD-Ai / Senergy-PGD-IDC 24V
Senergy-PGD-Ai 48V
Drawings
Performance Data
Pulse Gear Drive (PGD / PGD-Ai) 24V
Pulse Gear Drive (PGD-IDC) 24V Internal Drive Control
Pulse Gear Drive (PGD-Ai) 48V
Ordering Information
24V PGD Models
48V PGD Models
Installation Instructions
Washdown Idler Rollers
General Specifications
Ordering Information
Download as PDF
Threaded Motor End Hex Shaft
Non Threaded Motor End Hex Shaft Fixing Brackets
Idler End Options
Pulseroller Products
/
Motor Rollers
/
Mounting Options
/
Threaded Motor End Hex Shaft
For Shaft &/or Custom Options
⑧
P
*
Threaded Hex Shaft motor rollers include M12 Flange Nut
Conveyor Frame
Hex Hole Punch Dimensions
