Output Signals & LED Indicators /

The SPEED output on the Removable I/O Terminal Block provides a pulsed signal whose frequency is proportional to the motor’s running speed. This relationship is shown below.

*Please note that the SPEED output indicates the motor’s rotational frequency and not the roller tube. Please refer to your MDR’s gear reduction ratio information to calculate MDR rotational speed.

!Please note for part number EZ-Qube-P-MR (Article Number 1510-6020) the Speed output is not a frequency signal but is a maintained digital output signal that is energized whenever the motor is running

Click here to see a list of motor speed settings and their corresponding Speed Out frequencies