DIP Switch Settings / SPEED DIP Switch /
The relationship between the external voltage at input 0-10V and the motor speed is linear in the range of the minimum and maximum speeds of the MDR (580 – 5800) RPM for ECO and (580 – 4200) RPM for BOOST Mode. The table below shows 22 sample values at equal 0.5V intervals.
| 0-10V Input | ECO RPM |
BOOST RPM |
Open Loop PWM % |
| 0.00 V | 580 | 580 | 10% |
| 0.50 V | 580 | 580 | 10% |
| 1.00 V | 580 | 580 | 10% |
| 1.50 V | 870 | 630 | 15% |
| 2.00 V | 1160 | 840 | 20% |
| 2.50 V | 1450 | 1050 | 25% |
| 3.00 V | 1740 | 1260 | 30% |
| 3.50 V | 2030 | 1470 | 35% |
| 4.00 V | 2320 | 1680 | 40% |
| 4.50 V | 2610 | 1890 | 45% |
| 5.00 V | 2900 | 2100 | 50% |
| 5.50 V | 3190 | 2310 | 55% |
| 6.00 V | 3480 | 2520 | 60% |
| 6.50 V | 3770 | 2730 | 65% |
| 7.00 V | 4060 | 2940 | 70% |
| 7.50 V | 4350 | 3150 | 75% |
| 8.00 V | 4640 | 3360 | 80% |
| 8.50 V | 4930 | 3570 | 85% |
| 9.00 V | 5220 | 3780 | 90% |
| 9.50 V | 5510 | 3990 | 95% |
| 10.00 V | 5800 | 4200 | 100% |
| 11.00 V | 5800 | 4200 | 100% |