DIP Switch Settings /
● EZ-Qube-P
● EZ-Qube-N
● EZ-Qube-P-MR
● EZ-Qube-P-J
8 Switch Positions
| Switch # | Function | Switch OFF | Switch ON |
| 1 | Speed Range Selection | Low Range | High Range |
| 2 | Direction of Rotation | CW | CCW |
| 3 | Open / Closed Loop Speed Control | Open Loop | Closed Loop |
| 4 | Auto / Manual Error Reset | Manual Reset | Automatic Reset |
| 5 | Motor Performance Selection | ECO Mode* | Boost Mode* |
| 6 | Holding Brake Selection | Refer to Holding Brake Settings | |
| 7 | |||
| 8 | Deceleration Time Adjustment | Decel Time = Accel Time | Decel Time = 2 X Accel Time |
*Refer to Motor Performance Settings for definition of ECO and BOOST modes
● EZ-Qube-HTBF-P
● EZ-Qube-HTBF-N
9 Switch Positions
| Switch # | Function | Switch OFF | Switch ON |
| 1 | Speed Range Selection | Low Range | High Range |
| 2 | Direction of Rotation | CW | CCW |
| 3 | Open / Closed Loop Speed Control | Open Loop | Closed Loop |
| 4 | Auto / Manual Error Reset | Manual Reset | Automatic Reset |
| 5 | Motor Performance Selection | Refer to Motor Performance Settings | |
| 6 | |||
| 7 | Holding Brake Selection | Refer to Holding Brake Settings | |
| 8 | |||
| 9 | Deceleration Time Adjustment | Decel Time = Accel Time | Decel Time = 2 X Accel Time |