Spare Parts List is replaceable parts that can fail due to wear, improper use, or accidental damage to the machine. To order any of the parts listed below, contact support@postprocess.com.
| Part Number | Description |
|---|---|
| VAL0032 | Valve, Solenoid, 3/4” NPT, PTFE, SS 24VDC |
| HEA0009 | Immersion Heater, 316 SS, 13” lg, 230 VAC 3-Phase, 4500W |
| MOT0026 | Pump, Variable speed, 230-240 VAC, Stainless Steel |
| HAR0468 | Actuator, Paddle, Locking, Black |
| HAR0469 | Actuator, Splitter |
| HAR0474 | Cable, L-Fitting X Ball Fitting, No Spring, Type 7, 240MM Lg |
| HAR0470 | Rotary latch, Two stage, LH, 7.2MM thru holes, SS |
| HAR0472 | Bracket, Mounting, Cable, 19MM |
| HAR0473 | Clip, Retainer, Cable |
| HAR0471 | Rotary latch, Two Stage, RH, 7.2MM thru holes, SS |
| HAR0475 | Cable, L-Fitting X Ball Fitting, No Spring, Type 7, 240MM, Lg |
| ELE0024 | Switch, Safety Guard Lock |
| MAC1273 | VORSA 500 Lid Flap |
| TUB0131 | Hose, Chemical, 4” ID, UHMW |
| TUB0120 | Hose, Chemical, 1.5” ID, UHMW |
| TUB0119 | Hose, Chemical, 1 1-4” ID, UHMW |
| TUB0002 | Hose, Chemical, 1” ID, UHMW |
| TUB0156 | Hose, Chemical, 3” ID, UHMW |
| SEA0098 | Gasket, Self gripping – 2 point contact, 65°, EPDM |
| MOT0030 | Blower, Flexmount, 4”, 24VDC |
| SUB0521 | Assembly, Exhaust Vent Damper |
| TBD | Assembly, Inlet Vent Damper |
| FIT0420 | Flex Nozzle, 1/4” Loc-Line x 1/4” BSPT |
| FIT0422 | Flex Nozzle, Hose Elements, 1/4” 5.5” Lg |
| FIT0245 | Flex Nozzle, Prostream Nozzle, .160” × 1.25” |
| FIT0246 | Flex Nozzle, Element Clamp, 1/4” |
| FIT0248 | Flex Nozzle, Valve, Inline |
| SEA0105 | Foam Strip, 3MM x 30MM, EPDM, Adhesive Back |
| SEA0024 | Rubber Seal, 7/16” high, Side Bulb, 46” Lg (cut to length) |
| SEA0109 | Foam Strip, 3MMx 20MM, EPDM, Adhesive Back |
| SEA0111 | Edge Trim, 2.4MM THK, Fits 0.8-2.5MM, EPDM |
| SEA0106 | Gasket, Sanitary, 1.5”, BUNA |
| SEA0066 | Gasket, Clamp, 3/4” |
| SEA0108 | Gasket, Sanitary, 4”, BUNA |
| SEA0002 | Gasket, 2.5” Sanitary Tri-Clamp, BUNA |
| SEA0082 | Gasket, Clamp – 3”, EPDM |
| SEA0101 | O-Ring, Dash-230, 2.5” ID, 1/8” W, BUNA-N |
| VAL0039 | VVD Dosatron Dispenser Sleeve Retaining Nut |
| VAL0040 | VVD Dosatron Dispenser Hose Nut |
| VAL0041 | VVD Dosatron Dispenser T-Strainer |
| SEA0183 | O-RIng, -211, 18” thick, 13/16 ID, 1-1/16 OD, BUNA-N, For Dosatron |
| ELE0116 | 3+PE ECO Mate Connector, Male |
| ELE0117 | 3+PE ECO Mate Connector, Female |
| ELE0118 | 3+PE ECO Mate Bulkhead, Female |
| ELE0131 | Cable |
| ELE0544 | Cable |
| ELE0437 | Cable |
| ELE0509 | Connector |
| ELE0545 | Connector |
| ELE0170 | Fuse-01 |
| ELE0660 | Fuse-02 |
| ELE0341 | Fuse-01 |
| ELE0183 | Fuse |
| ELE0092 | Fuse-02 |
| ELE0547 | Fuse |
| ELE0070 | Fuse |
| ELE0134 | Fuse |
| ELE0645 | Fuse |
| ELE0551 | Fuse |
| ELE0465 | Relay, SPDT |
| ELE0480 | Relay, DPDT |
| ELE0053 | Relay, Sequencing |
| ELE0456 | DC Power Supply |
| ELE0216 | Cooling Fan |
| ELE0359 | Fan with Filter |
| ELE0047 | Momentary switch |
| SEN0001 | Pressure Sensor |
| SEN0002 | Level Sensor |
| SEN0023 | Float Switch |
| SEN0026 | Thermocouple |
| ELE0503 | Emergency Stop Push Button |
| ELE0566 | Locking Door Switch |
| ELE0416 | Contactor-01 |
| ELE0574 | Contactor-02 |
| ELE0587 | Safety Relay |
| ELE0194 | Reset Button |
| TBD | Electrical Schematic Print Out |
Post your comment on this topic.