The settings for VDA are explained in the following:
LST
Packing Piece Count (G) (@IAG_ERS0.U_VLSTS001)
Controls in batch 715/05 the amount of packages within mixed packages which are transmitted.
| Value | Effect |
|---|---|
| R | The real amount of received packages are transmitted |
| F | A fixed, configurable value is transmitted |
Replace Label Identifier For Mixed (@IAG_ERS0.U_VLSTS003)
Controls in batch 715/13, if the label ‘G’ for mixed packages is replaced by the label ‘M’.
| Value | Effect |
|---|---|
| N | No replacement |
| Y | Label ‘G’ is replaced by ‘M’ |
Remove Label Identifier For Empty Single (@IAG_ERS0.U_VLSTS004)
Controls in batch 715/13, if the label is removed for empty single packages.
| Value | Effect |
|---|---|
| N | Label ‘S’ won’t be removed |
| Y | Label ‘S’ will be removed |
Send Packing Piece Number From (@IAG_ERS0.U_VLSTS005)
Controls in batch 715/08, if ‘packing piece number from’ (lowest included packing piece number) is transmitted.
| Value | Effect |
|---|---|
| ALWAYS | Number is always transmitted |
| NFESL | Number is not transmitted for empty single |
Send Packing Piece Number To (@IAG_ERS0.U_VLSTS006)
Controls in batch 715/09, if ‘packing piece number to’ (highest included packing piece number) is transmitted.
| Value | Effect |
|---|---|
| ALWAYS | Number is always transmitted |
| NFESL | Number is not transmitted for empty single |
| NISAPPNF | Number is not transmitted, if it is identical to the packing piece number from |
Fill Quantity For Master & Mixed (@IAG_ERS0.U_VLSTS007)
Controls which fill quantity is transmitted for packing pieces of the type master and mixed.
| Value | Effect |
|---|---|
| A | The actual quantity is transmitted |
| Z | 0 is transmitted |
One Mixed Set For Each Batch (@IAG_ERS0.U_VLSTS008)
During mixing, empty masters can arise and also be deleted. Thus there can be some delivery note numbers, for which are only single available. This setting now controls, if for such delivery notes a virtual packing piece should still be accepted, for which a separate batch 715 is therefore created.
| Value | Effect |
|---|---|
| Y | Virtual packing pieces with the label ‘mixed’ are created and lead to the transmission of separate 715-batches |
| N | A single batch 715 is created just once per mixed packing piece, even if that means, that for some delivery note numbers only single is transmitted |
Changed Model Key First Character (@IAG_ERS0.U_VLSTS009)
Setting for the first character of the changed model key in field 714/21.
| Value | Effect |
|---|---|
| AB | Always BLANK |
| CN | BLANK or G, depending on the condition |
| AG | Always G |
Changed Model Key Second Character (@IAG_ERS0.U_VLSTS009)
Setting for the second character of the changed model key in field 714/21.
| Value | Effect |
|---|---|
| AB | Always BLANK |
| CN | BLANK or T, depending on the condition |
| AT | Always T |
Change Index As First Text (@IAG_ERS0.U_VLSTS010)
If the change index is transmitted as the first text during the creation of 716 batches.
| Value | Effect |
|---|---|
| N | Change index is not transmitted as the first text |
| Y | Change index is transmitted as the first text |
LAB
Demands Before Delimination Date (@IAG_ERS0.U_VLABR001)
Controls how requirements, which lay before the boundary date, are treated.
| Value | Effect |
|---|---|
| I | Requirements before the boundary date are ignored |
| B | Requirements before the boundary date are interpreted as backorder |
Source for Change Index (@IAG_ERS0.U_VLABR001)
Controls which value out of the forecast delivery is used as the change index.
| Value | Effect |
|---|---|
| NOTDEF | Origin is not defined |
| 515_09 | The change index ist selected out of field 515/09 |
| 518_03 | The change index ist selected out of field 515/03 |
FAB
Source for Change Index (@IAG_ERS0.U_VLABR001)
Controls which value out of the forecast delivery is used as the change index.
| Value | Effect |
|---|---|
| NOTDEF | Origin is not defined |
| 555_04 | The change index ist selected out of field 555/04 |
Post your comment on this topic.