To prevent injuries, the ATevo safety shield must always be installed when charger is in operation and/or energized. |
Style-5054 Enclosure Instructions
- A standard flat blade screwdriver is required.
- Open the ATevo front panel door to access safety shield.
- Remove the two (2) screws that attach the safety shield to the ATevo, one above AC Input Breaker (CB1), the other below theDC Output Breaker (CB2).
- Grab the safety shield on both left and right sides, and gently lift up and off of AC Input and DC Output Circuit Breakers.
- Reverse procedure for reinstalling the safety shield.
Style-5070 Enclosure Instructions
- Standard Phillips head screwdriver is required.
- Open ATevo front panel door to access safety shield.
- Remove four (4) screws from corners of top shield and (4) screws from corners of bottom shield.
- Grab the safety shield while removing the last screw, and gently remove.
- Reverse procedure for reinstalling the safety shield.
Last modified:
4 May 2021