4.3. Configuring Advanced Set Points & Alarms

This section details the configuration of ATevo’s new, more advanced features. It also details features that may have been present in legacy ATevo Series battery chargers, where the configuration process has been changed or simplified.

To enter Advanced Settings mode, select MENU > ADVANCED SETTINGS. ATevo will display a scrollable page of parameters.

To change a parameter, do the following:

• Navigate using UP and DOWN, and select it with EDIT/ENTER.
• Press LEFT and RIGHT to navigate to any digit to be modified.
• Press UP and DOWN to change setting value.
• Once desired setting is displayed, press EDIT/ENTER to store it.
  

Clicking on each parameter below will reveal a screenshot of how the parameter is configured:

High Voltage Shutdown (Section 7.2)

High Level Detect Threshold (Section 7.4)

End of Discharge (EOD) Alarm (Section 9.5)

Low Voltage Level Detect (Section 7.3)

AC Ripple Alarm (Section 9.5)

Positive (+) Ground Fault Sensitivity Level (Section 9.3)

Negative (-) Ground Fault Sensitivity Level (Section 9.3)

Battery Temperature Compensation (Section 12)

Battery Type for Temperature Compensation ( Section 12)