MIDI

Hippotizer can use Timecode over MIDI via a USB interface to receive Timecode.

Supported Devices:

Rosendahl Mif 4

Mif 4 Website

Adrienne Electronics USB LTC/RDR

USB-TC Website

To Configure:

1. Stop the Hippotizer Engine and Zookeeper
2. Plug in the USB Time Code device and allow Windows to discover it and install drivers. (Follow manufacturer instructions)
3. Start the Engine and Zookeeper and select the Midi source as an external source in Sync Manager
4. Click the settings cog and select the desired midi device
5. Enable the source. If timecode is being received the time counter should reflect it.