Each layer has independent Geometry controls
The basic Geometry controls place media onto the layer:
Pos-X
The ‘X’ or right to left position of the media.
Pos-Y
The ‘Y’ or up and down position of the media.
Continous
Switches the rotation control from Position to Speed. With Continuous disabled, rotation is similar to indexing a Gobo in a moving light.
Position / Speed
The position (or Index) or speed of rotation of a clip. This control is affected by the Continuous switch above.
Zoom
Zooms the content from 0 to 200% size on the layer.
| Note: If additional zoom is required the mega zoom effect should be used. |
Aspect
The aspect changes the aspect ratio of the media.
Post your comment on this topic.