To change the date format, the date, the time, the temperature measurement unit or the alarm settings or to read the preset alarm limits please proceed as follows:
- Press and hold SET …
- … then press READ …
- … then release both buttons simultaneously.
Note: Date and time can only be modified in the Standalone Version. Using the Cloud Version log in – into your Datamanagementsystem (SmartView, etc.) to make any changes.
OUTSIDE (external sensor) is now displayed on the screen.
You entered the menu mode and may choose which entry to see or change.
You can access the following 4 menus:
OUTSIDE (external sensor): first screen, shows the temperature measured with the internal sensor of the Fridge-tag 3 (normal ambient temperature).
Press READ once to get to SET DATE.
- SET DATE: change date and/or time settings
- READ CONF: read the alarm settings
- CELS FAHR: change the temperature unit
- SET CONN: de-/activate Flight Mode
Use the READ button to scroll through the menu.
Use the SET button to access the corresponding menu.
Access the menu “SET DATE”
The display shows OUTSIDE. Press READ until the display shows SET DATE.
Then follow the steps as described in Setting the date and Setting the time.
Note: Time and date adjustments have no effect on the alarm records. Adjustments can only be made for date and time settings and for changing the temperature measurement unit. Once the device is activated, it cannot be stopped anymore. The number of adjustments during the same day is unlimited. After an adjustment has been made, the Fridge-tag 3 will be locked for 24 hours from the following midnight (e.g. changes on 15 September., device locked from 00:01 am on the 16 September until 00:01 am on the 17 September). This is for security reasons.
Access the menu “READ CONF”
The display shows OUTSIDE (external sensor). Press READ until the display shows READ CONF. Then press SET to access the menu to read the current alarm configurations. First the display check appears. Then press READ repeatedly to scroll through the preset alarm parameters.
Access the menu “CELS FAHR”
The display shows SET DATE. Press READ until the display shows CELS FAHR. Then press SET to access the menu to change the temperature measurement unit. To change the measurement unit (Celsius/Fahrenheit) press READ until the display shows the desired sign (°C/°F). Press SET to confirm the measurement unit.
Access the menu “SET CONN”
The display shows OUTSIDE (external sensor). Press READ until the display shows „SET CONN“. Press SET to get to the flight mode status menu (active/inactive). To change the flight mode (active/inactive), press READ until the desired unit active/inactive appears on the display and then press SET to confirm this. In flight mode, the device does not react on SMS or send SMS, nor sends any data.
