Setting the date

Set date / time on server

Depending on the configuration of the device the date and time are set via server and auto date will appear on the screen. Go on with this chapter connection error.
Setting the date and time manually is disabled.

Set date manual (Standalone Version)

The following example shows how to set the date to:
16 February 2018 (16.02.2018) in European format.

The 1st digit is flashing.		Press READ until “1” appears as the first digit. Press SET to save.
The 2nd digit is flashing.		Press READ until “6” appears as the second digit. Press SET to save
The 3rd digit is flashing.		Press READ until “0” appears as the third digit. Press SET to save.
The 4th digit is flashing.		Press READ until “2” appears as the fourth digit. Press SET to save. Note: The fifth and the sixth digit are set automatically.
The 7th digit is flashing.		Press READ until “1” appears as the seventh digit. Press SET to save.
The 8th digit is flashing.		Press READ until “8” appears as the eighth digit. Press SET to save.

The date is now set to: 16.02.2018.

Note: After setting the date, the first digit of the time will start flashing.