Installation of the SIM card

Note: Only necessary if the SIM card is not preinstalled at factory.

	Remove cover Remove the SIM card cover with a screwdriver. (Screwdriver (Torx) is not included.)
	Open metal frame Slide the metal frame upwards (in the direction OPEN) indicated by the arrow.
	Lift SIM card insert tray After opening the metal frame lift SIM card tray upwards. Note: Pay attention that this pin is not damaged.
	Insert SIM card Insert the SIM card as shown left. The diagonal edge of the SIM card must be located on the bottom right if device is placed as shown on the right.
	SIM card insert tray with properly inserted SIM card SIM card chip (contacts) facing downwards.
	Close insert tray Press the SIM card insert tray down, hold and slide the metal frame forwards to lock the SIM card insert tray. Slide the metal frame in the arrow direction (LOCK).
	SIM card correctly inserted The SIM card tray is locked correctly when the SIM card insert tray can no longer be opened.
	Close SIM card cover Close the SIM card cover with the screwdriver.