The graph of the report is created dynamically depending on the following settings:
- the alarm limits of the device
- the highest and lowest measured value
This is valid for all graphs in the PDF file until:
- the highest and lowest measured values drop out of the history
- the temperature settings are changed
Example below: The scale of the graph depends on the alarm limits set. The temperature scale ranges from +40°C to –5°C for the limits of +0.5°C and +28°C.
Example below: The scale of the graph depends on the highest and lowest measured temperature values. The temperature scale ranges from –30°C to +60°C. Lowest measured temperature: –12°C, highest measured temperature: +25°C.