Table name: /BTI/TE_RISKL

There are 3 fields in this table:

  • RISKLEVELID: 10 character field for the Risk Level Identifier.
  • RISKLEVEL: 10 digit numerical field used to indicate the risk level. The higher the value of this field, the higher the risk.
  • TITLE: 50 character comment field. This can be used to indicate the risk level in words. For example, “Low risk”, “Moderate risk”, “High risk”, “Extremely High Risk”, etc.

Below are some example entries for this table:

Risk Level Identifier Risk Level Comment
BT0001 1 Risk level 1
BT0002 2 Risk level 2
BT0003 3 Risk level 3
BT0004 4 Risk level 4
BT0005 5 Risk level 5
BT0006 6 Risk level 6
BT0007 7 Risk level 7
BT0008 8 Risk level 8
BT0009 9 Risk level 9
BT0010 10 Risk level 10

When setting up Risk Analysis, you can specify a risk level value. If that is set, the Risk Analysis will only report on objects that have a risk level greater than the specified value.


Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Post Comment