Input Power Supply Requirements 24.0VDC +15% / – 25%
Input Protection Rating Class III
Standby Current Consumption < 30 mA without Motor
Built-in Current Limits Max. Peak Current 16 A
Max. Starting Current 3A
Max. Rated Current 2.8A
Motor PWM Frequency 20 kHz
Initialization Time <= 20 msec from power on
Motor Start Response <= 5 msec
Storage temperature -40ºC to 85º C ( -40ºF to 185ºF)
Ambient Operating temperature -10ºC to 40ºC ( 15°F to 104°F)
Humidity 5% to 95% non-condensing
Enclosure IP Rating IP20 – Indoor Use Only
Altitude up to 2000m
Environmental Pollution Class 2
Weight Approximately 60g