| Tag Name | Data Type | Module Register | Bit | Description |
|---|---|---|---|---|
| O_Acc_Adj_UpStr_to_DnZn | BOOL | 4:0184 | 8 | Accumulate Adjacent Upstream to Local Downstream Zone |
| O_Acc_Adj_UpStr_to_UpZn | BOOL | 4:0104 | 8 | Accumulate Adjacent Upstream to Local Upstream Zone |
| O_Acc_DnZn | BOOL | 4:0184 | 0 | Set Local Downstream Zone to Accumulate |
| O_Acc_UpZn | BOOL | 4:0104 | 0 | Set Local Upstream Zone to Accumulate |
| O_Clear_Jam_DnZn | BOOL | 4:0189 | 0 | Clear Jam at local Downstream Zone |
| O_Clear_Jam_UpZn | BOOL | 4:0109 | 0 | Clear Jam at local Upstream Zone |
| O_Clear_Motor_Error | BOOL | 4:0022 | 0 | Clear Motor Error Left & Right |
| O_ConfArrivalAdjDownstreamToDnZn | BOOL | 4:0184 | 9 | Confirm Downstream Arrival for Local Downstream Zone |
| O_ConfArrivalAdjDownstreamToUpZn | BOOL | 4:0104 | 9 | Confirm Downstream Arrival for Local Upstream Zone |
| O_ConveyMerge_Disable_Center | BOOL | 4:0387 | 4 | ConveyMerge: Disable Center Line from Releasing |
| O_ConveyMerge_Disable_Left | BOOL | 4:0387 | 5 | ConveyMerge: Disable Left Line from Releasing |
| O_ConveyMerge_Disable_Right | BOOL | 4:0387 | 6 | ConveyMerge: Disable Right Line from Releasing |
| O_ConveyMerge_Enable_PLC_Cntrl | BOOL | 4:0387 | 15 | Enable PLC to Control ConveyMerge Priorty and Release |
| O_ConveyMerge_Priority | SINT | 4:0387 | 0-7 | 0 = First come first served, 1 = Center line has priority, 2 = Left line has priority, 3 = Right line has priority |
| O_ConveyStop_Command | INT | 4:0020 | - | Set Local ConveyStop Command |
| O_DA_Mode_Cmd_DnZn | SINT | 4:0375 | Lo Byte | Direction & Accumulation Mode Command Byte for Downstream Zone |
| O_DA_Mode_Cmd_UpZn | SINT | 4:0365 | Lo Byte | Direction & Accumulation Mode Command Byte for Upstream Zone |
| O_DA_Mode_Value_DnZn | SINT | 4:0375 | Hi Byte | Direction & Accumulation Mode Data Byte for Downstream Zone |
| O_DA_Mode_Value_UpZn | SINT | 4:0365 | Hi Byte | Direction & Accumulation Mode Data Byte for Upstream Zone |
| O_Enable_Module | INT | - | AOI Logic | 1 – Move Reset Counter from Input to Output |
| O_Induct_Tracking_DnZn | DINT | 4:0212 (MSW) 4:0213 (LSW) | - | Writes tracking data of the product currently on the Downstream zone |
| O_Induct_Tracking_UpZn | DINT | 4:0132 (MSW) 4:0133 (LSW) | - | Writes tracking data of the product currently on the Upstream zone |
| O_Release_DnZn | BOOL | 4:0185 | AOI Logic | Release and Accumulate on Next at Downstream Zone |
| O_Release_UpZn | BOOL | 4:0105 | AOI Logic | Release and Accumulate on Next at Upstream Zone |
| O_Speed_Motor_Left | INT | 4:0040 | - | Value in mm/sec for MDR or RPM x 10 for PGD |
| O_Speed_Motor_Right | INT | 4:0064 | - | Value in mm/sec for MDR or RPM x 10 for PGD |
| O_Sts_DnZn_Discharge_FWD | SINT | 4:0232 | Lo Byte | Set Downstream Discharge Zone Forward Status Value |
| O_Sts_DnZn_Discharge_REV | SINT | 4:0232 | Hi Byte | Set Downstream Discharge Zone Reverse Status Value |
| O_Sts_UpZn_Induct_FWD | SINT | 4:0134 | Lo Byte | Set Upstream Induct Zone Forward Status Value |
| O_Sts_UpZn_Induct_REV | SINT | 4:0134 | Hi Byte | Set Upstream Induct Zone Reverse Status Value |
| O_Tracking_Induct_FWD | DINT | 4:0139 (MSW) 4:0140 (LSW) | - | Set Forward Induct Tracking Value |
| O_Tracking_Induct_REV | DINT | 4:0237 (MSW) 4:0238 (LSW) | - | Set Reverse Induct Tracking Value |
Post your comment on this topic.