10.5. Using Add On Instructions (AOI) with RSLogix 5000

Pulseroller has authored and made available Add On Instructions (AOI) in order to make your programming easier to follow. In this document up until this section, when connecting to a ConveyLinx-ECO Module regardless of mode; your PLC program needs to directly access the register data array tags created when you created the ConveyLinx-ECO Module instance. The AOIs attach to the created ConveyLinx-ECO Module’s register data arrays and maps the data into user tags and functions with meaningful names. There are two separate AOIs for use depending on the mode of the ConveyLinx-ECO Module you want to connect: a ZPA mode AOI and a PLC I/O mode AOI

*Please note that the use of AOI is purely optional. However, you must install the EDS file as previously described before you can use any AOI

Selecting the Proper AOI Instruction

AOI files are imported to your specific PLC program file and not into the RSLogix 5000 environment like an EDS file. The following chart provides a cross-reference for selecting the proper AOI file based upon the mode of operation

See ConveyLinx-ECO Module EDS and AOI Selection Cross Reference

*Please refer to the downloads section of Pulseroller.com for the latest updates to EDS and/or AOI files