Once the desired settings have been selected, the LEVO is ready for the cycle to be initiated. To start, press the PLAY button 
. This will initiate processing and display the Auto Run Screen (see below)
 |
| Auto Run Screen |
This screen monitors the activity of three key pieces of hardware: vibratory motor, dosing pump, and sediment pump (for draining). The Agitation Levels 1 through 4 determines the dosing frequency of the nozzles.
When highlighted blue, the hardware is active. When greyed out, the hardware is inactive.
 |
| Energy Sources, Auto Run Screen |
When the timer completes, the following screen will appear to confirm the cycle is complete.
Press the BLUE ARROW to continue.
 |
| Cycle Complete |
Post your comment on this topic.