How to start monitoring

When using SmartMonitor SHIP S with BLE intercommunication, start your gateway device (SmartMonitor SHIP L or SmartMonitor SHIP M) by following the steps as described in the user manual SmartMonitor

Automatic configuration

To start monitoring with the SmartMonitor SHIP S, press and hold the multifunctional button.

! Do not apply force as it will damage the multifunctional button.

Nr.	Screen	Description
1		Start all SmartMonitor devices used in the shipment by long-press of the multifunctional button.
2		Bluetooth must be enabled in SmartView. Make sure that the Bluetooth sign is displayed on all devices used in the shipment. The Bluetooth must be enabled in SmartView. For detailed instruction on how to enable Bluetooth, go to the user manual SmartView. ! If the Bluetooth sign is not displayed on SmartMonitor SHIP S, the device is measuring data, but at the end, a manual download needs to be performed to read-out the data in the SmartView cloud.

! Devices can be placed in the shipment after starting. Depending on the connectivity, the BLE intercommunication can take up to 1 hour to be established.

Start delay

*If a start delay is configured, the device starts with alarming only after start delay countdown. The remaining countdown is indicated on the display in days:hours:minutes format (if >24h: DDdHH, if <24h: HH:MM).

---

SmartMonitor start prevention

If the SmartMonitor displays “DO:SETUP” on the screen, a start prevention is defined in SmartView and a manual device configuration is required

When the function is enabled, the SmartMonitor cannot be started by pushing the multifunctional button as it is preventing the start of the SmartMonitor until assigning and downloading of another, startable configuration policy in SmartView.

Check here for WARNINGS on device start.

* The tick can be hidden by disabling the alarm status function in the configuration policy in SmartView. In this case, the field remains empty.

Copyright © 2025 Berlinger & Co. AG — Powered by