You’ll go to “Issue Card > Issue Card to Location”:
Then you’ll see the following screen:
When ordering cards, we always send out cards that are in the same sequence of cards.
Enter the “Starting” card number and the “Ending” card number.
“Total” will AUTOMATICALLY calculate the amount of cards.
You have to put something down for “Base issue Location”
“Charge amount” is the amount you want to load on to these cards for the first time. (This is the amount the cards will start with)
Some owners put a $1.00 to accommodate the $1 charge amount when using a Spyderwash kiosk, or to recoup your cost, Owners will leave the cards at $0.
Once you’ve chosen what you want for the amount, move to “Other Valid Locations” and select “All”.
Finally hit “Save”.
You will see some green text saying “Cards Issued Successfully”
