Settings

When the SETTINGS button is pressed, the user has access to basic operational functions as described below.

Enabling Settings

*When a toggle button is enabled, a representative symbol will be displayed in the bottom right corner.

Auto-Temperature – Heat is an important component of post-processing. The DEMI 800 Series has functionality built-in to allow the detergent to be maintained at a certain temperature when the machine is not in use. The AUTO-TEMPERATURE setting should be enabled if the tank needs to be kept at a constant temperature between cycles. If AUTO-TEMPERATURE is not enabled, the DEMI 800 Series tank heater will need to be run manually to bring the temperature up to the desired level before starting the cycle.
Auto-Temperature feature not applicable to -09, -10, -11, and -12 models and will not be displayed.

Advanced Output – When enabled, additional sensor data will be displayed in red throughout various screens. This mode is used for debugging.

Light Stack Test – When pressed, the light stack will illuminate so the user can verify that the lights are operational. The light stack should be tested at the beginning of each shift.