Auto Run Mode

Once the desired settings have been selected, the DEMI 800 Series is ready for the cycle to be initiated. To start, press the PLAY button .

*If there is a question mark displayed next to the PLAY button it is an indication that there is a condition inhibiting the cycle from starting.
For more information, press the green QUESTION MARK for more information.

Auto Run Screen

	PRESSURE GAUGE Displays the system pressure for the flow of liquid into and out of the circulation pump. Critically high or low pressure is an indication of a blockage or valve problem. NOTE: The agitation pump is not always on throughout the cycle. This number will drop to zero when their is no pump activity.
	ULTRASONICS POWER Displays the output percentage of the ultrasonics generator.
	TEMPERATURE Displays the current temperature of the detergent in the tank.
	ULTRASONICS ACTIVITY Displays a visual representation when the ultrasonics are active.
	CLOCK Displays the remaining time in the cycle.
	AGA INTENSITY METER A graphic representation of the current energy output of the system, based on the Agitation Algorithm. NOTE: The color and size of this meter will vary with the system energy level throughout the cycle.

!The DEMI 800 Series is designed to detect conditions at the start of an Auto Run cycle that may inhibit performance or safety. See the Alarms and Warning section for full detail.