Deutsch
Español
English
Português
Français
GSR
Inhaltsverzeichnis
GSR
1.
Hinweis des Herstellers
2.
Produktbeschreibung
2.1.
Frontplatte des Geräts
2.1.1.
SIM-Steckplatz
2.1.2.
LED-Statusanzeigen
2.1.3.
Konnektivität
2.1.4.
Konfigurationstaste (SMART)
2.2.
Rückseite des Geräts
3.
Installation und Inbetriebnahme
4.
Technician View
4.1.
Scan QR
4.2.
Login
4.3.
Add device
4.4.
Attention
4.5.
Processing Screen
4.6.
Select device
4.7.
Lift Controller Configuration
4.8.
Telealarm Configuration
4.9.
Complete Configuration Status View
4.10.
Technician View Troubleshooting
5.
Konfiguration per SMS
5.1.
Abfrage eines Parameters
5.2.
APN-Konfiguration
5.3.
WLAN-Konnektivität
5.4.
Statusbericht
5.5.
Warnung bei niedrigem Akkustand
5.6.
Neustart des Geräts
5.7.
Software-Neustart
5.8.
Blacklist-Verwaltung
5.9.
Arbeitsmodus-Einstellungen
5.9.1.
Konfigurationsbefehle als GSM-Modu
5.9.2.
Konfigurationsbefehle als Telealarm
6.
Troubleshooting Guide.
6.1.
GSR Hardware
6.1.1.
Power Supply of the GSR
6.1.2.
GSR Without Coverage, or Poor Coverage.
6.1.3.
GSR is not connected to Nayar VPN
6.1.4.
GSR Without Telephone Line Output
6.1.5.
GSR does not respond to corrective actions.
6.2.
GSR work GSM mode
6.2.1.
Autodialer without telephone line.
6.2.2.
Autodialer does not establish communication when calling. (Incorrect configuration)
6.2.3.
Autodialer does not establish communication when calling (Incidence in the control centre).
6.2.4.
Autodialer does not initiate emergency call.
6.3.
GSR work Autodialer mode.
6.3.1.
Mk-791 / Mk-891 does not make a call
6.3.2.
Mk-791 / Mk-891 skip ‘busy line’ locution
6.3.3.
Mk-791 / Mk-891 does not call out or make paging calls.
6.3.4.
Incorrect Mk-791 / Mk-891 volumes.
6.4.
Controller telemetry
6.4.1.
GSR during the installation process does not communicate with the controller.
6.4.2.
GSR has lost communication with the controller.
6.5.
Main SMS list
7.
Throubleshooting GSR
8.
Technischer Support
Als PDF herunterladen
6.4.
Controller telemetry
6.3.4.
Incorrect Mk-791 / Mk-891 volumes.
6.4.1.
GSR during the installation process does not communicate with the controller.
Go back to ‘Troubleshooting’
Index:
1º –
GSR not establishing communication with the operation during commissioning.
2º –
GSR has lost communication with the operation.
3º –
GSR is not connected to the Nayar VPN.
6.3.4.
Incorrect Mk-791 / Mk-891 volumes.
6.4.1.
GSR during the installation process does not communicate with the controller.
