4.8. Configuring Ethernet Adapter

ATevo can support an optional Ethernet Adapter (A22) module.
The Ethernet Adapter module:

• can support SCADA protocols (DNP3 or Modbus)
• will support an ATevo web page interface (future)
• will permit a file transfer mechanism to upload/download files for firmware upgrade and log file transfer (future)
  

*For configuration details, refer to the supplementary ATevo Communications Manual (JA0102-54). This document details communication hardware / wiring, defines communication capabilities, and lists ATevo front panel configuration. Finally, it catalogs DNP3 and Modbus communication registers.