Plug the Fridge-tag into any computer via USB interface. Make sure the device is plugged in properly.
Note: Disconnect the external sensor from the device first.

The Fridge-tag will now generate a PDF and ASCII report of the last 30, 60 days (factory preset). This process may take up to 30 seconds. Now choose the appropriate file generated by the Fridge-tag.

USB connection of the Fridge-tag
The continuously appearing arrows in the upper display area indicate that the device is processing.

Note: This process must not be interrupted until the OK symbol appears on the display. The example below indicates that the creation of the ASCII and PDF files as been successfully completed.

The device is shown in your explorer. Open the desired file generated by the device.

Note: To disconnect the device properly, please always use the function “Safely Remove Hardware” on your PC/Mac.

Right-click the icon “Safely Remove Hardware and Eject Media” in the Windows taskbar (lower right corner). Choose the corresponding device to remove.
Do not disconnect the device before you receive the depicted message, otherwise the device can be damaged.

Note: For this process no additional software is necessary.

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.