4.3. Run/Reverse Inputs

The Run/Reverse inputs on all modules (EXCEPT EZ-QUBE-P-J Article Number 1510-6040) can be wired to accept either PNP or NPN source signals.

*The PNP and NPN versions of refer to how the ERROR and SPEED OUTPUTS are electrically configured at the factory. NPN or PNP part number designations do not apply to the signal source for the Run/Reverse inputs.

!To use the REVERSE input, either RUN A or RUN B must also be energized. Please note that you DO NOT have to de-energize both RUN A and RUN B signals in order to change MDR direction with the REVERSE input.

Single Module Wiring

Wiring Multiple Modules in Parallel with Single Output

Wiring Multiple Modules in Parallel with Individual Outputs