| Input Power Supply Requirements | 24.0VDC +15% / – 25% | |
| Input Protection Rating | Class III | |
| Standby Current Consumption | < 30 mA without Motor | |
| Built-in Current Limits | Max. Peak Current | 16 A |
| Max. Starting Current ECO Mode | 3A | |
| Max. Rated Current ECO Mode | 2.5A | |
| Max. Starting Current BOOST Mode | 5A for 1.5 seconds | |
| Max. Rated Current BOOST Mode | 3.5A | |
| Max. Starting Current BOOST 8 Mode (EZ-QUBE-HTBF-P, -N Only) | 8A for 1.5 seconds | |
| Max. Rated Current BOOST 8 Mode (EZ-QUBE-HTBF-P, -N Only) | 3.5A | |
| Motor PWM Frequency | 33.3 kHz +/- 0.1% | |
| Digital Input Minimum ON Current | 1.5 mA | |
| Digital Input Maximum OFF Current | 0.4 mA | |
| Initialization Time | <= 20 msec from power on | |
| Motor Start Response | <= 5 msec | |
| Storage temperature | -40ºC to 85º C ( -40ºF to 185ºF) | |
| Ambient Operating temperature | -10ºC to 40ºC ( 15°F to 104°F) -30ºC to 40ºC (-22°F to 104°F) EZ-QUBE-HTBF-P, -N Only |
|
| Humidity | 5% to 95% non-condensing | |
| Enclosure IP Rating | IP20 – Indoor Use Only | |
| Altitude | up to 2000m | |
| Environmental Pollution | Class 2 | |
| Weight | Approximately 70g | |