The motor port is a 9 pin JST Style connector that accommodates Pulseroller Senergy motor rollers and PGD units.
 |
 |
| Pin | Description |
|---|---|
| 1 | GND |
| 2 | Vcc – Hall Effect Sensor Power |
| 3 | Motor Winding U |
| 4 | Motor Winding V |
| 5 | Motor Winding W |
| 6 | Hall Effect Sensor U |
| 7 | Hall Effect Sensor V |
| 8 | Hall Effect Sensor W |
| 9 | Not Used for EZ-QUBE-N, -P, P-MR, -P-J Mechanical Brake control for EZ-QUBE-HTBF-N, -P |