The module utilizes 2 output signals: SPEED and ERROR.
SPEED Signal
- For all modules except EZ-QUBE-P-MR (Article Number 1510-6020), the SPEED output produces an oscillating signal whose frequency is proportional to the speed of the motor.
- For the EZ-QUBE-P-MR (Article Number 1510-6020) module, the SPEED output is a non-oscillating digital signal that is energized when the motor is running and de-energized when the motor is stopped.
How to Wire the SPEED signal
Click here to see a list of motor speed settings and their corresponding Speed Out frequencies
Click here for the definition of the SPEED Output
ERROR Signal
The ERROR signal is a digital output that is used in conjunction with the LED Status Indicators to display specific conditions of the module. In general, when any one of several error conditions is active, the ERROR signal will be ON. If no error condition exists, then the ERROR signal will be OFF