The relationship between the external voltage at input 0-10V and the motor speed is linear in the range of the minimum and maximum speeds of the MDR (580 – 5800) RPM for ECO and (580 – 4200) RPM for BOOST Mode. The table below shows the 22 sample values at equal intervals.

No. 0-10V
Input
ECO Mode
Motor RPM
BOOST Mode
Motor RPM
Open Loop
PWM %
1 0.00 V 580 580 10.00%
2 0.50 V 580 580 10.00%
3 1.00 V 580 580 10.00%
4 1.50 V 870 630 15.00%
5 2.00 V 1160 840 20.00%
6 2.50 V 1450 1050 25.00%
7 3.00 V 1740 1260 30.00%
8 3.50 V 2030 1470 35.00%
9 4.00 V 2320 1680 40.00%
10 4.50 V 2610 1890 45.00%
11 5.00 V 2900 2100 50.00%
12 5.50 V 3190 2310 55.00%
13 6.00 V 3480 2520 60.00%
14 6.50 V 3770 2730 65.00%
15 7.00 V 4060 2940 70.00%
16 7.50 V 4350 3150 75.00%
17 8.00 V 4640 3360 80.00%
18 8.50 V 4930 3570 85.00%
19 9.00 V 5220 3780 90.00%
20 9.50 V 5510 3990 95.00%
21 10.00 V 5800 4200 100.00%
22 11.00 V 5800 4200 100.00%