Connecting to Siemens PLCs with Profinet IO / Integrating PLC Topology Configuration / Module Configuration / ZPA/Reduced ZPA Modes /
Upstream/Downstream Zones
 |
Set zone’s release mode of operation |
 |
Timer value when using GAP Train Release |
 |
Change the logical polarity of the Sensor |
 |
Change the polarity of the Sensor’s Error signal |
 |
Change motor’s Default Rotation Direction |
 |
Enable/Disable various zone options |
 |
Set zone’s Motor Type |
 |
Enter desired Motor Speed |
 |
Change motor’s Brake Method |
 |
Enter desired motor Accel/Decel values |