ConveyStop / Using a PLC with ConveyStop /
ConveyStop Status Register
The data in this register is to be interpreted bit wise regardless of the PLC protocol used. The following chart lists the bit definitions for the ConveyStop Status Register:
| Bit | Description |
|---|---|
| 0 thru 4 | Reserved |
| 5 | 1 = Stop Command issued from a hardwired button on a module in the Stop Group 0 = No Stop Command issued from a hardwired button on a module in the Stop Group |
| 6 | 1 = Stop Command issues because of loss of Ethernet connectivity 0 = Ethernet connectivity is OK |
| 7 | 1 = Stop Command issued because of loss of connection to PLC 0 = PLC connectivity is OK |
| 8 | 1 = Stop Command issued because Stop Button on local module’s Left Control Port (or CNIP I0/I1) 0 = Stop button OK on local module’s Left Control Port(or CNIP I0/I1) |
| 9 | 1 = Stop Command issued because Stop Button on local module’s Right Control Port (or CNIP I0/I1) 0 = Stop button OK on local module’s Left Control Port(or CNIP I0/I1) |
| 10 | 1 = Stop Command issued from PLC 0 = PLC is not issuing a stop command |
| 11 thru 15 | Reserved |