The AUX terminal (Pin 4) on each of the two Sensor Port connectors on the ConveyLinx-ECO Module is configurable as to its potential function. The default “out-of-the-box” usage for the AUX Input in “None”. From the AUX Tab from the ConveyLinx Advanced Dialog allows you to select one of the following functions for each zone on the module:
| Function | Description |
|---|---|
| None | No ZPA Function but signal is available to be read as input by remote PLC/PC |
| Accumulate | Input for local zone accumulate command |
| Wake-up | Input for local zone wake-up signal |
| Wake-up with timeout | Input for local zone wake-up with timeout to stop motor |
| Lane Full Interface | Input for local Lane Full Interface signal |
| Sensor for Backward Operation | Input for reverse direction sensor when ZPA is configured as reversing conveyor |
Depending on how the module is configured, you can independently select which of these functions you want to reside on which of the two available AUX Input signals.
Post your comment on this topic.