Once the desired settings have been selected, the RADOR is ready for the cycle to be initiated. To start, press the PLAY button . This will initiate processing and display the Auto Run Screen (see below)

Auto Run Screen

This screen monitors the activity of three key pieces of hardware: vibratory motor, dosing pump, and sediment pump (for draining). The Agitation Levels 1 through 4 determines the dosing frequency of the nozzles.
When highlighted blue, the hardware is active. When greyed out, the hardware is inactive.

Energy Sources, Auto Run Screen

When the timer completes, the following screen will appear to confirm the cycle is complete.
Press the BLUE ARROW to continue.

Cycle Complete

Yorum

Bu yardımcı oldu mu?

Evet Hayır
Bu konunun size yardımcı olmadığını belirttiniz ...
Bize neden olduğunu söyleyen bir yorum bırakır mısınız? Teşekkürler!
Yorumun için teşekkür ederim.

Bu konuyla ilgili geribildirimlerinizi gönderin.

Lütfen destek soruları icin bunu kullanmayın.
Your feedback will remain private. Click here to Request Technical Support.

Yorum Gönder