Once the desired settings have been selected, the RADOR is ready for the cycle to be initiated. To start, press the PLAY button . This will initiate processing and display the Auto Run Screen (see below)

Auto Run Screen

This screen monitors the activity of three key pieces of hardware: vibratory motor, dosing pump, and sediment pump (for draining). The Agitation Levels 1 through 4 determines the dosing frequency of the nozzles.
When highlighted blue, the hardware is active. When greyed out, the hardware is inactive.

Energy Sources, Auto Run Screen

When the timer completes, the following screen will appear to confirm the cycle is complete.
Press the BLUE ARROW to continue.

Cycle Complete

Réaction

Était-ce utile?

Oui Non
Vous avez indiqué que ce sujet ne vous a pas été utile ...
Pouvez-vous SVP laisser un commentaire nous disant pourquoi? Merci!
Merci pour vos commentaires.

Laissez votre avis sur ce sujet.

SVP ne pas utiliser pour des questions de support technique.
Your feedback will remain private. Click here to Request Technical Support.

Valider