The sediment tank is located on the floor in the center of the enclosure and collects the waste solution that has drained from the processing chamber.
Depending on the Drain Mode option selected in the Settings section, one of the following screens will be shown when the sediment tank has reached capacity.

Bucket Drain

If Bucket Drain Mode is selected, the cycle will automatically pause and the user will be prompted to drain the sediment tank as shown below.
To drain, press and hold the BLUE ARROW. When the sediment tank is empty, the motor will resume the finishing process with no loss in finishing time.
This is also confirmed when the vertical green bar disappears, or the Sediment Tank % displays 0% on the Auto Run Mode screen.

Drain Bucket, User Prompt

Drain Plumbed

If Drain Plumbed Mode is selected, the sediment tank pump will automatically turn on without disrupting the cycle.
The SEDIMENT PUMP button will turn blue to indicate that it is actively draining.

Drain Plumbed, Active sediment pump

Yorum

Bu yardımcı oldu mu?

Evet Hayır
Bu konunun size yardımcı olmadığını belirttiniz ...
Bize neden olduğunu söyleyen bir yorum bırakır mısınız? Teşekkürler!
Yorumun için teşekkür ederim.

Bu konuyla ilgili geribildirimlerinizi gönderin.

Lütfen destek soruları icin bunu kullanmayın.
Your feedback will remain private. Click here to Request Technical Support.

Yorum Gönder