| |
The icons on the right of the screen control access to basic navigation features.
- HOME – returns to the Home Screen.
- INFO – for current cycle operational data (see below).
- FEATURES – for basic system settings.
- ALERTS – displays Alarm conditions. (See Alerts)
|
There are four variables that can be configured in the Auto Setup screen. The settings chosen for a specific cycle is based on the unique properties of the part being finished.
| AIR % |
System and individual nozzle control |
| LIQUID % |
System and individual nozzle control |
| TIME |
Part processing will automatically stop once the cycle time expires |
| TEMPERATURE |
The system will maintain this temperature throughout part processing. |
In addition, the speed, direction, and boundaries can be set for both the top and side nozzles. The turntable direction and speed can also be easily adjusted. The screens below can be used to make these adjustments and then store the settings to be used during processing.
| |
| Determine and store motion settings |
*A PostProcess Application Engineer will discuss the optimal settings for your application during the initial setup.
Laissez votre avis sur ce sujet.