1. Select MANUAL MODE.

  1. Then, click both DRAIN buttons followed by both PUMP buttons. This will drain the tank to less than 10% full.

  1. To perform a gravity drain of the remaining detergent, disconnect anything attached to the drain outlet located on the backside of the machine.
    Use a small bucket to collect any residual detergent before proceeding.
  1. Next, open the access panel on the right side of the machine to reveal the plumbing.
  1. Find the plumbing labeled “MANUAL DRAIN” and turn the valve located inline with this plumbing. At this point, the liquid will gravity drain out of the machine.

  1. Once the gravity drain is complete, the valve and access panel may be closed.

Réaction

Était-ce utile?

Oui Non
Vous avez indiqué que ce sujet ne vous a pas été utile ...
Pouvez-vous SVP laisser un commentaire nous disant pourquoi? Merci!
Merci pour vos commentaires.

Laissez votre avis sur ce sujet.

SVP ne pas utiliser pour des questions de support technique.
Your feedback will remain private. Click here to Request Technical Support.

Valider