Setting Auto-Drain/Dose Operation

Once Auto-Drain or Auto-Dose is enabled, the user can adjust Auto-Drain/Dose Configuration settings. To access the settings, press the PAGE ARROW from the Auto-Temperature Configuration screen.

!Ensure the drain hose is connected to a proper waste disposal reservoir before enabling Auto-Drain

Auto Temperature Configuration Settings

Number of Cycle Between Auto-Drain – Set the desired number of autocycles that must run before Auto-Draining occurs.

Auto-Level Check Wait Time – Sets the time between level checks during an autocycle while Auto-Level is enabled.

*Press the orange ⓧ button to exit any screen. A confirmation will display.