How to use CadConnect – Detail screen – Data Field definitions

In the line detail display you have several columns and fields available depending on your needs.

The configuration of the display is done using the standard BC function Personalize

  • Type

Type is normally derived from what you insert – item, routing etc.

Please notice you can redefine a new item into a Production BOM (Phantom item) type. By default a type “Item” will be created.

Doing this process of course depend on having a bill of material which shall be turned into a production bill of material

  • Level
    System maintained. For referance to specify the structure
  • No
    Item number / Work Center no. / Machine Center no. / Routing no.
  • No 2
    Item number 2
  • Description
    Item description / Operation description / Routing description
  • Description 2
    Item description 2
  • Additional text
    Additional text is for CadConnect use only
  • Template Routing no.
    You can type / select an existing routing no. in this field to be used as the routing for the item. The routing operations will be added on the lines below depending on Setup
  • Item type
    This field can have 3 different values – Production, Purchase or Assembly
    When you work with a BOM structure the system will find the most appropriate Type based on BOM relations. However you can overrule this value, in the field “Item Replenishemnt system” for existing items, the value from the item card will be shown

• Item Replenishment System
This field can have 3 different values – Production, Purchase or Assembly
If you want to overrule the values calculated by CadConnect in “Item Type” you can do this by using this field. When creating new items, the value from this field “Item Replenishment System” will be transferred to the Item Card in BC to the field “Replenishment System”.
The function can be relevant, if you create an item with a BOM but you normally purchase the item.
Please refer to general Make or Buy considerations

  • Quantity
    Component quantity for the line
  • Where-Used
    This is a single level where used system maintained field updated automatically when working
  • Unit of Measure Code
    Unit of measure code. Contains a look up function to the BC Unit of measure file, that Relates to the Quantity, Imported value, keyed in value or default value
  • Setup Time
    Setup time for an operation line
  • Setup Time Unit of Measure Code
    Setup time unit of measure code to be selected
  • Run Time
    Run time for an operation line
  • Run Time Unit of Measure Code
    Run time unit of measure code to be selected

• Wait Time
Wait time for an operation line

• Wait Time Unit of Measure Code
Wait time unit of measure code to be selected

• Move Time
Move time for an operation line

• Move Time Unit of Measure Code
Move time unit of measure code to be selected

  • Routing Link Code
    If you want to link material and routing operations to each other, use this field.
  • Vendor No.
    For an item line it is possible to look up in BC vendor file and select a (primary) vendor for this item.
  • Vendor Item No.
    For an item you can key the vendor item number for the selected vendor, in this field.
  • Unit Cost
    For a new item the cost price can be keyed in this field. For an existing item this field will contain the unit cost price from BC.
  • Gross Weight
    You can key the gross weight for an item
  • Version Code
    Used on Purchased items will update CadConnect version file. Used on Produced items will update Bom. Used on operations will update Routings.
  • Version start
    Will be used as starting date of the version
  • Previous version
    If an active BOM version exists, the version will be shown in this field. For purchased items the previous version relates to the CadConnect version file.
  • Position
    Reference to a position number can be keyed here
  • Position 2
    Reference to a position number can be keyed here
  • Position 3
    Reference to a position number can be keyed here
  • Starting Date
    If you use Effective dates on bill of materials, components can be time-phased using this field.
  • Ending Date
    If you use Effective dates on bill of materials, components can be time-phased using this field.
  • Length
    Length of the item can be keyed in this field.
  • Width
    Width of the item can be keyed in this field.
  • Depth
    Depth of the item can be keyed in this field.
  • Calculation Formula
    A calculation formula can be keyed in this field
  • First Comment
    Clicking this field will display the screen for adding/editing comments to the line.
    First line of the comments will always be displayed in the CadConnect detail screen.
  • Config. Template
    If this is a new item select a item creation template if not using the CadConnect Setup default template

  • Variant Code
    If you use BC variants connected to items do a look up in this field, and select an item variant for the item.
  • Single-Level Material Cost
    Single-Level Material Cost
    For further info check out standard BC cost calculation principles.
  • Single-Level Capacity Cost
    Single-Level Capacity Cost
    For further info check out standard BC cost calculation principles.
  • Single-Level Cap. Overhead Cost
    Single-Level Cap. Overhead Cost
    For further info check out standard BC cost calculation principles.
  • Total Cost
    Total Cost
    For further info check out standard BC cost calculation principles.

• Simulated Unit Cost
For simulation purposes a new unit cost price can be keyed in this field.

• Simulated Single-Level Material Cost
Will be calculated based on Simulated Unit Cost.
For further info check out standard BC cost calculation principles.

• Simulated Single-Level Capacity Cost
Will be calculated based on Simulated Unit Cost.

• Simulated Single-Level Cap. Overhead Cost
Will be calculated based on Simulated Unit Cost.

For further info check out standard BC cost calculation principles.
• Simulated Total CostT

  • Total of simulated cost elements.

For further info check out standard BC cost calculation principles.

  • Various collums for attributes are set up in CadConnect, and depending on the Setup field to show attributes on lines.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Naveksa Help Center

Post Comment