Output Modules

Functionality

Swapping Modules:

• System does not need to be shut down in order to swap modules.
• It is recommended to stop Hippotizer Engine when swapping Output Modules as this may have negative effects on Output Manager and display arrangements.
• Ensure Modules are installed correctly with metal sled down.
• Ensure both thumbscrews are tightened once desired module is installed.
• Do not operate the system with a missing module slot.
  

Status Light:

Each module is equipped with a Status LED.

• Green: Connection Active, EDID Emulated, Genlock Active
• Blue: Connection Active, EDID Emulated, Genlock Not Active
• Yellow: Connection Active, EDID Not Emulated, Genlock Not Active
• Red: Connection Not Active
  

Module Types

Displayport 1.4

Max Resolution: 4096 × 2160 @ 60Hz 10Bit 4:4:4
Supports Splitters: Yes
Supports Conversion to Analogue (VGA): No
Supports Adaptor to DVI or HDMI: Yes

HDMI 2.0

Max Resolution: 4096 × 2160 @ 60Hz 10Bit 4:2:2
Supports Splitters: Yes
Supports Conversion to Analogue (VGA): No