Wireless Base Configuration Repeater Mode
Step 1. In Repeater mode, click ‘Wireless -> Basic Settings’ located in the Web Management interface. The following message will be displayed on your web browser:
Wireless Enable | Wireless On/Off |
---|---|
Delete | Remove the repeater connection profile |
Repeater SSID | The “SSID” of your wireless network |
Security Type | Setup the repeater SSID security type |
Security Key | The password of your wireless network |
Step 2. Click the ‘Apply’ button and the Omega WiFi Amp will begin to restart.
*We suggest that your current WiFi Security Key should not include strange symbols such as $ *& ^, as these might lead to a failed configuration. Characters and numbers are highly recommended.
Wireless Base Configuration – AP Mode
Step 1. In AP mode, click “Wireless -> Basic Settings” located at the Web Management interface. The following message will be displayed on your web browser:
You could configure the minimum number of Wireless settings for communication, such as Network Name (SSID) and Channel. The Access Point can be set simply with only the minimum setting items.
Wireless Enable | Wireless On/Off |
---|---|
Channel | Auto (recommended) |
SSID | The “SSID” of your wireless network |
Security Type | Setup wireless security and encryption to prevent unauthorized access and monitoring. Supports 64/128-bit WEP, WPA, WPA2, WPA/WPA2 encryption methods |
Security Key | The password of your wireless network |
Step 2. Click ‘Apply‘ button and the Omega WiFi Amp will begin to restart
*We suggest that your current WiFi Security Key should not include strange symbols such as $ *& ^, as these might lead to a failed configuration. Characters and numbers are highly recommended.
Post your comment on this topic.