COMPONENTS
A. All in One 15E
B. Antenna GSM (Optional)
C. Wireless USB Adapter (Optional)
D. USB Extender cable
E. 12VDC power adapter (Optional)
F. Converter DC/DC 24V/12V (Optional)
G. Die cut
CONNECTORS DIAGRAM
INSTALLATION
1. Use the die included in the box and mark the necessary anchor points for the installation of the Advertisim.
2. Remove the die, drill the surface based on the image drawn in the previous step. Place the antenna (if included) on the outside of the cabin (recommended roof), in order to improve the signal reception and pass the antenna cable and the 12V power cable of the Advertisim to the cabin.
3. Connect the Wireless USB adapter (if supplied) using the USB extension cable. Connect the antenna (9) and the power connector.
4. Make the connections to the control.
5. Insert the display pins into the drilled holes.
6. Depending on the model purchased, connect the integrated power supply cable to the power supply system of the installation (use the DC/DC converter if applicable) or plug the adapter into a power socket (8) and connect it to the Advertisim.
7. Configure the device using the Manager.
