3.3 Importing a Configuration

Once a single copy of the Akkadian Console is configured, you can import the same configuration settings when installing subsequent copies of the console on other machines.

Important: This step is optional. If you do not wish to import a configuration, press Skip and proceed to the next section.

To import an existing configuration:

1. For Akkadian Console version 3.x+, browse to import the profile3.xml file and click OK.
2. To import a configuration from version 2.x, click Import FCO 2.x configuration.
3. Locate the profile.xml file and click OK.
4. If this is your first setup and you do not have an existing .XML configuration file, select Skip from the Configuration Window to continue with a manual configuration.
   

Note:

• If importing from an existing configuration, the profile3.xml file is located in the C:\ProgramData\akkadian Labs\akkadian Console folder
• If you import an existing configuration, you may need to change the monitored device. Once the installation is complete, go into the Options menu to switch the device.
  

Copyright and Trademarks:

I. Copyright:

This website and its content is copyright © 2018 Akkadian, LLC. All rights reserved. Except with the prior written permission of Akkadian, LLC, any redistribution or reproduction of part or all of the contents of this website, including the redistribution or reproduction of any documentation or other materials downloaded from this website, in any form and in any media, is prohibited.

II. Trademarks:
Akkadian, the Akkadian logo and other trademark or service marks used on this website, whether registered or not, are the property of Akkadian, LLC and may not be used or reproduced without the prior written permission of Akkadian, LLC.

aPME UG 1/8/2018 0001 © http://www.akkadianlabs.com/apme/